News

Home / News / The reasons and solutions for the abnormal noise of the wiper manufacturer's boneless wipers?

The reasons and solutions for the abnormal noise of the wiper manufacturer's boneless wipers?

The reasons and solutions for the abnormal noise of the wiper manufacturer's boneless wipers?
When the driver presses the switch of the car wiper, the motor starts, and the speed of the motor drives the swing arm through the deceleration and torque increase of the worm gear. Swing, and finally the rotating shaft drives the wiper blade to sweep the windshield.
Reasons for the abnormal noise of the boneless wipers:
1. The windshield is large, and the wiper strip needs to be very long to ensure that the clean area of ​​the windshield is suitable, and the vertical force point of soft windscreen wiper blades manufacturers the boneless wiper is only one. Therefore, it is difficult to ensure that the end does not vibrate, and this tremor is an important factor in abnormal noise.
2. Exhaust gas pollution causes many irregular-sized oil films on the glass surface that are not easy to see. Where there is oil film, it will be smooth to scrape, and where there is no oil film, it will be very dry, and those oil films will become dust particles after they are stained. Astringent, affecting the smoothness of the scraper on the glass
3. The aged scraper will bend to a certain extent and become hard, which is also an important factor leading to sound. The aged wiper blade (because of the vertical pressure of the wiper arm, causing the wiper blade to deform) is in contact with the glass. The deformed wiper blade at this time, plus the irregular oil film on the glass that is not easy to remove, directly As a result, the scraper is very easy to "jump" on the glass surface and then vibrate irregularly, and the direct result is noise.
The solution to the abnormal sound of the boneless wiper:
1. The windshield is large, and the wiper strip needs to be very long to ensure that the clean area of ​​the windshield is suitable, and the vertical force point of the boneless wiper is only one. Therefore, it is difficult to ensure that the end does not vibrate, and this kind of vibration is an important factor for abnormal noise. For this one, in addition to changing a car with a smaller windshield, a better way is to replace it with a multi-point pressure bone wiper arm .
2. Exhaust gas pollution causes many irregular-sized oil films on the glass surface that are not easy to see. Where there is oil film, it will be smooth to scrape, and where there is no oil film, it will be very dry, and those oil films will become dust particles after they are stained. It is astringent, which affects the smoothness of the scraper on the glass. In addition to changing the city life with a better environment, the frequent use of soft windscreen wiper blades factory glass water can achieve a certain effect.
3. The aged scraper will bend to a certain extent and become hard, which is also an important factor leading to sound. If you don't want to replace the blade, then a better way is to lubricate the glass and let the blade slide on the glass instead of rough scraping on the rough glass. Since it is a lubrication problem between the glass and the rubber, it is recommended to replace it with a new one "Soft" scraper.